Advanced Configuration Features
23
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
set radius server key
Adds the required shared key to the RADIUS server host
configuration. Note that the previous command has to be issued and
the server key entered before the RADIUS server will become active.
Sequence:
set radius server key [index] [someString] press Enter
Where [index] is the server index 1…5 and [someString] is an alpha-
numeric string of up to 32 characters in length.
The system responds:
Key set. When server Host and Key are set,
'save mib' and 'reset system' for changes to take effect
get radius servers
Check that servers have been set up correctly by issuing this
command
Sequence:
get radius servers press Enter
The system responds:
index active_host active_key cfgd_host cfgd_key
===== =============== =============== ===============
1 192.168.1.48 testing123 192.168.1.48 testing123
2 192.168.10.51 password4
3
4
5
Note that the second host is not yet active as the sytem has not been
reset. After a system reset the ip address and key will be repeated
under the active host and active key columns.
To Next Page
Loading...