Advanced Configuration Features
73
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
set rls [on/off]
[basic/advanced]
Turns the Rapid Link Shutdown (RLS) feature on or off. Turning RLS
on, with the optional "advanced" feature, enables use of the signal
fault monitor as well as the signal degrade monitor. Setting RLS on
without issuing the basic or advanced command defaults to RLS on,
basic.
RLS provides the ability to shut down the Horizon Compact Ethernet
ports (Port 1 on both endpoints) during system outages.
Note: a save mib and reset system command must be issued in order
for the rls setting to take effect.
The default is "off".
Sequence:
set rls [on/off] [basic/advanced] Press Enter
The system responds:
RLS option [on/off][basic/advanced]
Where
On means the RLS function is active.
Off means the RLS function is inactive.
get rls link control Displays the state of the Rapid Link Shutdown (RLS) link control
feature. RLS provides the ability to shut down the Horizon Compact
Ethernet ports (Port 1 on both endpoints) during system outages. The
RLS link control feature determines how the system will react when
link recovery takes place, either providing automatic recovery of the
Ethernet ports by the Horizon Compact system or waiting for the user
to manually recover the Ethernet ports through use of the "set rls link
enable on" command.
The default is "off".
Sequence:
get rls link control press Enter
The system responds:
RLS link control option is set to [on/off]
Where
On means the user has to re-establish the Ethernet connection by
using the "set rls link enable on" command
Off means the system will auto-recover the Ethernet connection.
To Next Page
Loading...