Vigor2862 Series User’s Guide
196
Index Click the number below Index to access into the setting
page.
Profile Display the name of the LAN DNS profile.
Domain Name Display the domain name of the LAN DNS profile.
Forwarding Display that such profile is conditional DNS forwarding or
not.
DNS Server Display the IP addres of the DNS Server.
To create a LAN DNS profile:
1. Click any index, say Index No. 1.
2. The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item Description
Enable Check this box to enable such profile.
Profile Type a name for such profile.
Note: If you type a name here for LAN DNS and click OK to
save the configuration, the name also will be applied to
conditional DNS forwarding automatically.
Domain Name Type the domain name for such profile.
IP Address List The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure two
IP addresses mapping with the same domain name.
Add – Click it to open a dialog to type the host’s IP address.
To Next Page
Loading...
Need help?
General
