Draytek Vigor2862 Series User Manual

Vigor2862 Series User’s Guide
223
I
I
I
I
-
-
5
5
-
-
1
1
2
2
-
-
2
2
C
C
o
o
n
n
f
f
i
i
g
g
S
S
y
y
n
n
c
c
This page is used to specify the synchronization time for such Vigor router.
Available settings are explained as follows:
Item Description
Enable Config Sync (Max.
Sync to 10 routers)
Check this box to enable configuration synchronization.
To sync configuration from primary to secondary router,
both primary and seconday routers need to enable “config
sync”. Note that config sync can be enabled by Hot-Standby
redundancy method only.
Config Sync Interval Day / Hour / Minute - The primary router will synchronize its
configuration with secondary routers at every specified time
interval.
Exclude the following
settings from config sync
Settings selected in this field will be excluded when
executing configuration synchronization. This setting is
available when the Redundancy Method is set to “Hot
Standby”.
When you finish the configuration, please click OK to save and exit this page.
When the configuration method is set to “Hot Standby”, the following settings will not be
synchronized:
 WAN (user selectable)
 LAN
 LAN IPv6
 router name
 admin and user passwords

Draytek Vigor2862 Series Specifications

General

Brand	Draytek
Model	Vigor2862 Series
Category	Firewall
Language	English