Vigor2862 Series User’s Guide
204
is 36 characters.
Confirm Shared Secret - Re-type the Shared Secret for
confirmation.
Enable Accounting After checking it, Vigor router supports the accounting
feature (available seconds for using, quantity of RX/TX data)
for external RADIUS server. Any client tries to access the
Internet shall be authenticated and accounted by an external
RADIUS server.
Accounting Port –The UDP port number that the RADIUS
server is using. The default value is 1813, based on RFC 2138.
Disconnect Message Port – Set a port number for listenning
the RADIUS disconnection message.
Update Interval – Set a time interval for sending the
accounting request to the RADIUS server.
RADIUS Server Status Log Display the record of current status of RADIUS server.
After finished the above settings, click OK button to save the settings.
I
I
I
I
-
-
5
5
-
-
5
5
-
-
2
2
I
I
n
n
t
t
e
e
r
r
n
n
a
a
l
l
R
R
A
A
D
D
I
I
U
U
S
S
Except for being a built-in RADIUS client, Vigor router also can be operated as a RADIUS server
which performs security authentication by itself. This page is used to configure settings for
internal RADIUS server. Then LAN user of Vigor router will be authenticated by Vigor router
directly.
To Next Page
Loading...
Need help?
General
