Vigor2862 Series User’s Guide
202
Action Specify which action Call Schedule should apply during the
period of the schedule.
Force On -Force the connection to be always on.
Force Down -Force the connection to be always down.
How Often Specify how often the schedule will be applied.
Once -The schedule will be applied just once
Weekdays -Specify which days in one week should
perform the schedule.
Monthly, on date – The router will only execute the
action applied such schedule on the date (1 to 28) of a
month.
Cycle duration – Type a number as cycle duration.
Then, any action applied such schedule will be
executed per several days. For example, “3” is selected
as cycle duration. That means, the action applied such
schedule will be executed every three days since the
date defined on the Start Date.
3. Click OK button to save the settings.
Example
Suppose you want to control the PPPoE Internet access connection to be always on (Force On)
from 9:00 to 18:00 for whole week. Other time the Internet access connection should be
disconnected (Force Down).
Office
Hour:
(Force On)
Mon - Sun 9:00 am to 6:00 pm
1. Make sure the PPPoE connection and Time Setup is working properly.
2. Configure the PPPoE always on from 9:00 to 18:00 for whole week.
3. Configure the Force Down from 18:00 to next day 9:00 for whole week.
4. Assign these two profiles to the PPPoE Internet access profile. Now, the PPPoE Internet
connection will follow the schedule order to perform Force On or Force Down action
according to the time plan that has been pre-defined in the schedule profiles.
To Next Page
Loading...
Need help?
General
