Draytek Vigor2862 Series User Manual

Vigor2862 Series User’s Guide
8
Interface Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the button
pressed and released. For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released the button once.
 2.4G (On) and 5G (Off) – pressed and released the button
twice.
 2.4G (Off) and 5G (Off) – pressed and released the button three
times.
When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client’s device making
network connection through WPS.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED
is blinking). Press the hole and keep for more than 5 seconds.
When you see the ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with the factory
default configuration.
DSL Connecter for accessing the Internet.
LAN P1~P4 Connecters for local network devices.
P5 / WAN2 Connecter for local network devices or modem for accessing
Internet.
USB 1~2 Connecter for a USB device (for 3G/4G USB Modem or printer or
thermometer).
Phone 1/2 Connecter for analog phone(s).
Line Connector for PSTN life line.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Draytek Vigor2862 Series Specifications

General

Brand	Draytek
Model	Vigor2862 Series
Category	Firewall
Language	English