Draytek Vigor2862 Series User Manual

Vigor2862 Series User’s Guide
25
7
profile.
 End - Type an address as the ending IP for such profile.
IP Subnet – Define a subnet containing IP address and mask
address.
 Network – Type an IP address here.
 Mask – Use the drop down list to choose a suitable mask
for the network.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Destination Any – Any IP can be treated as the destination IP.
IP Range – Define a range of IP address as destination IP
addresses.
 Start - Type an address as the starting IP for such
profile.
 End - Type an address as the ending IP for such profile.
IP Subnet – Define a subnet containing IP address and mask
address.
 Network – Type an IP address here.
 Mask – Use the drop down list to choose a suitable mask
for the network.
Domain Name – Specify a domain name as the destination.
 Select – Click it to choose an existing domain name
defined in Objects Setting>>String Object.
 Delete – Remove current used domain name.
 Add – Create a new domain name as the destination.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Country Object – Use the drop dwon list to choose a
preconfigured object. Then all IPs within that country will
be treated as the destination IP.
Destination Port Any – Any port number can be treated as the destination
port.
Dest Port Range –
 Start - Type the destination port start for the
destination IP.
 End - Type the destination port end for the destination
IP. If this field is blank, it means that all the destination
ports will be passed through the WAN interface.
Send to if criteria
matched
Interface – Use the drop down list to choose a WAN or LAN
interface or VPN profile. Packets match with the above
criteria will be transferred to the interface chosen here.
Gateway IP – Specific gateway is used only when you want
to forward the packets to the desired gateway. Usually,
Default Gateway is selected in default.
Packet Forwarding to WAN via – When you choose WAN
(e.g., WAN1) as the Interface for packet transmission, you
have to specify the way the packet forwarded to. Choose
Force NAT or Force Routing.
Failover to – Check this button to lead the data passing
through specific interface (WAN/LAN/VPN/Route Policy)
automatically when the selected interface (defined in Send

Draytek Vigor2862 Series Specifications

General

Brand	Draytek
Model	Vigor2862 Series
Category	Firewall
Language	English