Draytek Vigor2862 Series User Manual

Vigor2862 Series User’s Guide
269
c. Set up DHCP IP pool, enable Use MAC Address, add the host's MAC address to the
table, and connect the host to the router from any of the LAN ports.
After finishing above configurations, host with a public IP 211.100.200.154/ mask
255.255.255.248/ Gateway IP 211.100.200.153 will be able to access Internet through Vigor
Router.
R
R
o
o
u
u
t
t
i
i
n
n
g
g
U
U
s
s
a
a
g
g
e
e
L
L
A
A
N
N
We may also create a LAN subnet for routing usage. Here we take LAN 2 for example.
1. Go to LAN >> VLAN,
a. Enable VLAN Configuration.
b. Set up a VLAN for LAN2 Subnet.
c. Specify the LAN ports that belongs to LAN2 subnet (which is port 5 and 6 in this
example), note that these are the ports to which the host should connect.

Draytek Vigor2862 Series Specifications

General

Brand	Draytek
Model	Vigor2862 Series
Category	Firewall
Language	English