Vigor2862 Series User’s Guide
298
Mode
There are several modes provided for you to choose.
Info
You should also set Wireless LAN(2.4GHz)
802.1X Setting simultaneously if 802.1x mode
is selected.
Disable - Turn off the encryption mechanism.
WEP-Accepts only WEP clients and the encryption key should
be entered in WEP Key.
WEP/802.1x Only - Accepts only WEP clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
WPA/802.1x Only- Accepts only WPA clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
WPA2/802.1x Only- Accepts only WPA2 clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
Mixed (WPA+WPA2/802.1x only) - Accepts WPA and WPA2
clients simultaneously and the encryption key is obtained
dynamically from RADIUS server with 802.1X protocol.
WPA/PSK-Accepts only WPA clients and the encryption key
should be entered in PSK.
WPA2/PSK-Accepts only WPA2 clients and the encryption key
should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2 clients
simultaneously and the encryption key should be entered in
PSK.
WPA
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication. Either 8~63 ASCII characters, such as
012345678(or 64 Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as
012345678..(or 64 Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Password Strength – The system will display the password
strength (represented with the word of weak, medium or
strong) of the PSK specified above.
EAPOL Key Retry - The default setting is "Enable". It can
make sure that the key will be installed and used once in
To Next Page
Loading...
Need help?
General
