Vigor2862 Series User’s Guide
344
communicate, then.
Default SIP Account You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile
names for the accounts as the default one for this phone
setting.
Play dial tone only when account registered - Check this
box to invoke the function.
In addition, you can press the Advanced button to configure tone settings, volume gain, MISC
and DTMF mode. Advanced setting is provided for fitting the telecommunication custom for
the local area of the router installed. Wrong tone settings might cause inconvenience for
users. To set the sound pattern of the phone set, simply choose a proper region to let the
system find out the preset tone settings and caller ID type automatically. Or you can adjust
tone settings manually if you choose User Defined. TOn1, TOff1, TOn2 and TOff2 mean the
cadence of the tone pattern. TOn1 and TOn2 represent sound-on; TOff1 and TOff2 represent
the sound-off.
Available settings are explained as follows:
Item Description
Region Select the proper region which you are located. The common
settings of Caller ID Type, Dial tone, Ringing tone, Busy
tone and Congestion tone will be shown automatically on
the page. If you cannot find out a suitable one, please choose
User Defined and fill out the corresponding values for dial
tone, ringing tone, busy tone, congestion tone by yourself for
VoIP phone.
To Next Page
Loading...
Need help?
General
