Vigor2862 Series User’s Guide
45
characters.
Confirm Password Retype the password.
WAN IP Configuration
Obtain an IP address automatically – The router will get an
IP address automatically from DHCP server.
Specify an IP address – You have to type relational settings
manually.
IP Address - Type the IP address.
Subnet Mask – Type the subnet mask.
Gateway – Type the IP address of the gateway.
Primary DNS – Type in the primary IP address for the router.
Second DNS – Type in secondary IP address for necessity in
the future.
PPTP Server / L2TP
Server
Type the IP address of the server.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
3. Please type in the IP address/mask/gateway information originally provided by your ISP.
Then click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
To Next Page
Loading...
Need help?
General
