Vigor3900 Series User’s Guide
89
Available parameters are listed as follows:
Item Description
Profile
Display the name of the LAN profile.
Enable This Profile
Check this box to enable this profile.
Start IP
Set the starting IP address of the IP address pool for DHCP
server.
End IP
Set the ending IP address of the IP address pool for DHCP
server.
DNS
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor3900 as the DNS server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
– click the icon to remove the selected entry.
Routers
In general, this box will be blank. It means Vigor3900 will
be regarded as the gateway for the user.
However, if you want to use other gateway, please assign the
IP address in this field.