VigorAP 800 User’s Guide
102
4. Open LAN>General Setup to configure the settings for enabling DHCP server on
LAN-A/LAN-B. If there is a DHCP server configured in the same network segment,
skip this step.
5. After finishing the above settings, the wireless equipment connecting to VigorAP 800
with SSID 1 can get the IP address assigned by LAN-A 192.168.1.0/24 for accessing
the internal server. The wireless equipment connecting to VigorAP 800 with SSID 2
can get the IP address assigned by LAN-B 192.168.2.0/24 for using the video/audio
uploading and downloading services.
To Next Page
Loading...
