Draytek VigorAP 902 - Trouble Shooting; 5.1 Checking Hardware Status

VigorAP 902 User’s Guide
241
3. Open Wireless LAN(2.4GHz) >> Security Settings and Wireless LAN(5GHz) >>
Security Settings. Set the encryption method and set the password for SSID 1 and
SSID 2 respectively.
4. Open LAN>General Setup to configure the settings for enabling DHCP server on
LAN-A/LAN-B. If there is a DHCP server configured in the same network segment,
skip this step.