Draytek VigorAP 902 User Manual

VigorAP 902 User’s Guide
83
Encryption
Display the encryption mode for the scanned AP.
Authentication
Display the authentication type that the scanned AP applied.
Mode
Display the wireless connection mode that the scanned AP used.
Ch. Width
Display the channel width that the scanned AP used.
Scan
It is used to discover all the connected AP. The results will be
shown on the box above this button
Channel Statistics
It displays the statistics for the channels used by APs.
AP’s MAC Address
If you want the found AP applying the WDS settings, please
type in the AP’s MAC address.
AP’s SSID
To specify an AP to be applied with WDS settings, you can
specify MAC address or SSID for the AP. Here is the place that
you can type the SSID of the AP.
Add
Type the MAC address of the AP. Click Add. Later, the MAC
address of the AP will be added and be shown on WDS settings
page.

Draytek VigorAP 902 Specifications

General

Brand	Draytek
Model	VigorAP 902
Category	Wireless Access Point
Language	English