9 SMS-functions - use of mobil phone
With the function to send SMS activated you can send SMS messages , acknowledge alarms and
receive information from the PC 200 about the alarms and values about pumps and if they are running
or not
9.1 Alarm by SMS messages
When an alarm is generated in the PC-200, a text message is sent by the connected GSM modem to the
established phone list. The modem will send an SMS text alarm to the first mobile phone in the
telephone number list (maximum 3 numbers), the message will have the following format:
For the settings on how to send the SMS messages see chapter 5.6.1.
9.2 Remote confirmation of the alarms
Once you have received an alarm message on your phone and you have activated the remote
confirmation function, you will confirm the alarm remotely by returning the same alarm text to the
PC-200. Depending on the mobile phone there are different ways of doing this. But the important is to
send back the same message that you have recieved on the phone.
Once the PC-200 receive your return SMS message, the blinking Alarm lamp will stop blinking as an
indication of that the alarm is confirmed.
In the mobile phone you will se the following about the alarms:
-The internal alarm number
-Pumpstation name
-That it an alarm from pump number 1
-Alarm name.
To Next Page
Loading...