Drip Drop PC-200 - 9.3 To ask questions via SMS texts

MANUAL PC-200
Ver. 2.12.xx/10/22/2010-UK
Page 45 (61)
9.3 To ask questions via SMS texts
In addition to receiving SMS-alarms from the unit you can send questions for further detailed
information as shown below.
1. Information about active alarms
2. Information about pump status, time and number of starts
3. Information about actual values in the station , level and running or stopped pumps.
1. Information group (Alarms)
2. Information group (Status)
3. Informationgroup (Station data)
Get a
Alarms occured:
1. Alarm pump 1
Over current
2. Alarm pump 2
NOT in AUTO
To receive information about active
alarms –
Send following message
Received message is an answer
with a list of active alarms…
Get s
Pump status:
P1 No of starts: 10
P1 Operation time: 5.25
P2 o of starts: 9
P2 Operation time: 5.10
To receive information about the
pump status--
Send followung message
Received message of the status of
the pumps, how many starts of the
pumps and operation time today since
00,00 hrs.
Get d
Actual values:
Level (m):
Q out (l/s):
P1= OFF
P2 = ON
P3 = OFF
To receive information about the
actual values –
Send following message
Received message with actual
level, outflow and if pumps are
running or not.