11
4.1 Accessing the Escort5580
Locally
To access the Escort5580 locally, pick up any local
touchtone telephone and enter the three digit
Telephone Access Code (default [
***
]). The
Escort5580 will seize the line and announce
“Hello.”“Hello.”
“Hello.”“Hello.”
“Hello.”
If the Access Code Required for Local Access
option is enabled (section [021], option [02]) the
Escort5580 will announce
“Enter your Access Code.”“Enter your Access Code.”
“Enter your Access Code.”“Enter your Access Code.”
“Enter your Access Code.”
Invalid access codes count towards the Main Panel
Keypad Lockout, if enabled
(see your system’s
Installation Manual).
The Escort5580 will function even if the telephone
line is disconnected. The panel monitors the
telephone line and if it senses an interruption to the
external telephone line connection it will tell the
Escort5580 to provide the current required so that
the Escort5580 will continue to function locally. For
this to operate properly, enable Telephone Line
Supervision on the control panel
(see your system’s
Installation Manual).
4.2 Accessing the Escort5580
Remotely
Downloading Answer Enabled must be
ON in Section [401] of the PC50XX OR
section [71] of the PC1580 for Remote
Access.
If the Remote Access option (section [021], option
[01]) is enabled the Escort5580 users can access
the system from any touchtone telephone in the
world.
1. Call the telephone number the Escort5580 is
connected to.
2. Let the telephone ring one or two times.
3. Hang up and wait 10 seconds before calling
again. The Escort5580 will answer after the
first or second ring and announce
“Hello.” “Hello.”
“Hello.” “Hello.”
“Hello.”
4. Enter the 3-digit Telephone Access Code. If
this is not entered within 10 seconds the
Escort5580 will announce
“Goodb“Goodb
“Goodb“Goodb
“Goodb
yy
yy
y
e,”e,”
e,”e,”
e,”
and hang up. Once the correct code has been
entered, the system will prompt,
“Enter y“Enter y
“Enter y“Enter y
“Enter y
our Aour A
our Aour A
our A
ccess Code.”ccess Code.”
ccess Code.”ccess Code.”
ccess Code.”
5. Enter a 4- or 6-digit access code. The
Escort5580 will begin to announce the status
of the system. If you do not enter an access
code within 20 seconds, or if you enter it
incorrectly 3 times, the Escort5580 will
announce
“Goodb“Goodb
“Goodb“Goodb
“Goodb
yy
yy
y
e,”e,”
e,”e,”
e,”
and hang up. Invalid access codes count
towards the Main Panel Keypad Lockout, if
enabled
(see your system’s Installation
Manual).
4.3 Global or Partition Operation
If you are connecting the Escort5580 to a system
with 2 partitions, you can program the Escort to
allow access to both partitions (global operation),
or to only one partition.
Global Operation
If the security system has been set up with 2
partitions, enable the Access Code Required for
Local Access option (section [021], option [01]).
Enabling this option ensures that users can only
access partitions they have permission for.
When a user accesses the Escort5580, it will
automatically determine which partition(s) to select
from the access code entered. (E.g. if the access
code entered only works on partition 1, the Escort
will allow access to partition 1 and begin to
announce its status.)
If the access code entered has permission for both
partitions, the Escort5580 will prompt:
“T“T
“T“T
“T
o select {System}, press [1]."o select {System}, press [1]."
o select {System}, press [1]."o select {System}, press [1]."
o select {System}, press [1]."
“T“T
“T“T
“T
o select {Partition 2}, press [2]."o select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."o select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."
S E C T I O N 4
Escort5580 Access Programming
To Next Page
Loading...
Need help?
General
