DSC Power Series

38
Automation Item Output Follower
On PC50XX v1.0 control panels, valid entries are (03-14) only. On PC1580 v1.0 and higher
control panels, valid entries are (01-02) only.
Up to 4 automation items can be programmed to follow any one PGM output on the
system.
To program an automation item to follow a PGM output:
1. Enter the section number corresponding to the automation item (e.g. for automation item 1, enter [401].
2. Enter a 2-digit PGM number (01-14; 00= no PGM) to specify the PGM Output to be followed. Default=00
[401] Automation Item 1
l
_____
l
_____
l
[417] Automation Item 17
l
_____
l
_____
l
[402] Automation Item 2
l
_____
l
_____
l
[418] Automation Item 18
l
_____
l
_____
l
[403] Automation Item 3
l
_____
l
_____
l
[419] Automation Item 19
l
_____
l
_____
l
[404] Automation Item 4
l
_____
l
_____
l
[420] Automation Item 20
l
_____
l
_____
l
[405] Automation Item 5
l
_____
l
_____
l
[421] Automation Item 21
l
_____
l
_____
l
[406] Automation Item 6
l
_____
l
_____
l
[422] Automation Item 22
l
_____
l
_____
l
[407] Automation Item 7
l
_____
l
_____
l
[423] Automation Item 23
l
_____
l
_____
l
[408] Automation Item 8
l
_____
l
_____
l
[424] Automation Item 24
l
_____
l
_____
l
[409] Automation Item 9
l
_____
l
_____
l
[425] Automation Item 25
l
_____
l
_____
l
[410] Automation Item 10
l
_____
l
_____
l
[426] Automation Item 26
l
_____
l
_____
l
[411] Automation Item 11
l
_____
l
_____
l
[427] Automation Item 27
l
_____
l
_____
l
[412] Automation Item 12
l
_____
l
_____
l
[428] Automation Item 28
l
_____
l
_____
l
[413] Automation Item 13
l
_____
l
_____
l
[429] Automation Item 29
l
_____
l
_____
l
[414] Automation Item 14
l
_____
l
_____
l
[430] Automation Item 30
l
_____
l
_____
l
[415] Automation Item 15
l
_____
l
_____
l
[431] Automation Item 31
l
_____
l
_____
l
[416] Automation Item 16
l
_____
l
_____
l
[432] Automation Item 32
l
_____
l
_____
l
P R O G R A M M I N G W O R K S H E E T S