Ducati Hyperstrada User Manual

Changing the PIN CODE
This function changes your four number PIN CODE.
To display this function, access the Setting Menu and
select the "PIN" page.
Note
If, when accessing this function, "INSERT NEW
PIN" and a string of dashes "- - -" are displayed,
function is not active as PIN CODE has never been
entered. Enter your PIN code with the "PIN enabling"
function.
Once function is accessed, the "MODIFY PIN CODE"
indicator will be displayed; press button (1) or (2) to
change the PIN code.
Note
To change the PIN code, you must remember
the already stored PIN.
The "OLD" indicator and four dashes "- - - -" will be
displayed; now enter the old 4-digit PIN number
stored before.
Entering the old PIN code (OLD PIN):
- each time you press button (2), the highlighted
number increases from 0 to 9 and back to 0,
press button (4) to confirm;
- repeat this procedure until entering the fourth
digit.
- Press button (4) again to confirm.
If code is wrong, the "ERROR" indicator (wrong old
code) will be displayed for 3 seconds, then the
instrument panel will display again the "EXIT"
indicator.
If code has been correctly entered, the "CORRECT"
indicator will be displayed, and the first dash will be
highlighted to indicate that it is possible to enter the
new 4-digit code.
99

Ducati Hyperstrada Specifications

General

Transmission	6-speed
Frame	Tubular steel Trellis frame
Exhaust	2-1-2 system with catalytic converter and 2 lambda probes
Front Suspension	43 mm upside-down forks
Rear Suspension	Progressive linkage with adjustable Sachs monoshock
Front Brake	2 x 320 mm semi-floating discs, radially mounted Brembo monobloc 4-piston calipers
Rear Brake	245 mm disc, 2-piston caliper
Fuel Tank Capacity	16 liters (4.2 US gal)
Fuel Injection	Electronic fuel injection, 53 mm throttle bodies