Menu 1 functions: Average speed indicator
(SPEED AVG)
This function shows the average speed of the
motorcycle.
The calculation considers the distance and time since
Trip 1 was last reset. When Trip 1 is reset, the value
is reset and the first value available is displayed 10
seconds after the reset.
Dashes “- -.-” are shown on the display during the
first 10 seconds when the value is not yet available.
The active calculation phase occurs when the engine
is running and the vehicle is stopped (moments when
the vehicle is not moving and the engine is off are not
considered).
The calculated value is displayed increased by 5% to
align it with the vehicle indicated speed.
Fig. 17
38
To Next Page
Loading...
Need help?
General
