Ducati Hyperstrada User Manual

Helmet cable
Remove seat as described in paragraph "Seat lock
page 140" .
Remove cable (1) from seat.
Pass the cable (1) through the helmet and insert one
end of the cable in the frame pins (2), as shown in the
figure.
Leave the helmet hanging and refit the seat to hold it
in place.
Warning
This device protects the helmet against theft
when the motorcycle is parked. Do not leave the
helmet attached when riding the motorcycle; it could
interfere with your movements and cause loss of
control of the motorcycle.
1
Fig. 94
1
2
Fig. 95
142

Ducati Hyperstrada Specifications

General

Brand	Ducati
Model	Hyperstrada
Category	Motorcycle
Language	English