Entering PIN CODE function for vehicle
release
This function provides vehicle temporary starting in
the event of an engine lock due to the Immobilizer
system malfunctioning.
If upon Key-On a Immobilizer ERROR is present, the
instrument panel will automatically enable the PIN
entering function.
Entering the code:
- each time you press button (2), the highlighted
number increases from 0 to 9 and back to 0,
press button (4) to confirm;
- repeat this procedure until entering the fourth
digit.
- Press button (4) again to confirm.
If code is wrong, the instrument panel will display the
"WRONG" indicator for 2 seconds and then will
display again the starting indicator to repeat the PIN
code entering procedure.
If code was correctly entered, the instrument panel
will display the "CORRECT" indicator for 2 seconds.
After this time, the instrument panel will go back to
the standard display (with all indicators active).
Note
PIN code entering can be repeated as many
times as you want; nevertheless, instrument panel
will automatically turn off 120 seconds after
attempting to enter the PIN code and the "TIME OUT"
indicator will be displayed for 2 seconds. Instrument
panel will then go back to the main page.
105
To Next Page
Loading...
Need help?
General
