Ducati Hyperstrada User Manual

DTC set up
This function allows customising DTC (Ducati
Traction Control) intervention level and, if necessary,
disabling it.
To display this function, access the Setting Menu and
select the R.MODE page.
Use buttons (1) and (2) to select the riding mode you
wish to edit, then press button (4).
Use keys (1) and (2) to select the DTC indicator, then
press button (4) to access the setup page.
Now, always using buttons (1) and (2), you can
increase or decrease DTC level; press button (4) to
confirm the new level.
The different settings are 01, 08 and OFF.
Note
If OFF is set, the DTC will be disabled.
Once the new setup is selected, press button (4).
The instrument panel will automatically highlight the
"MEMORY" indicator; to store the new setup, keep
button (4) pressed for 3 seconds. After this time, the
instrument panel will display the "MEMORIZED"
indicator for 2 seconds as a confirmation of the
change made.
The "EXIT" indicator will be automatically highlighted;
press button (4) to quit this page and go back to the
setting menu.
Note
If on DEFAULT lettering right side a symbol is
displayed, this means that the default setup is active,
namely that the parameters shown are those set up
by Ducati.
65

Ducati Hyperstrada Specifications

General

Transmission	6-speed
Frame	Tubular steel Trellis frame
Exhaust	2-1-2 system with catalytic converter and 2 lambda probes
Front Suspension	43 mm upside-down forks
Rear Suspension	Progressive linkage with adjustable Sachs monoshock
Front Brake	2 x 320 mm semi-floating discs, radially mounted Brembo monobloc 4-piston calipers
Rear Brake	245 mm disc, 2-piston caliper
Fuel Tank Capacity	16 liters (4.2 US gal)
Fuel Injection	Electronic fuel injection, 53 mm throttle bodies