Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently. The brake
lever has a wheel (2) for adjusting the distance
between lever and twistgrip on the handlebar. To
adjust it, keep lever (1) fully extended and turn knob
(2) in one of the four positions. Position no. 1
corresponds to the max. distance between lever and
knob, while position no. 4 corresponds to the min.
distance.
Warning
Set front brake lever when motorcycle is
stopped.
To Next Page
Loading...
Need help?
General
