Ducati Hyperstrada User Manual

DEFAULT (Resetting the default
parameters of a single Riding Mode)
This function allows restoring all Ducati setup
parameters for a single Riding Mode.
To display this function, access the Setting Menu and
select the "R.MODE" page.
Use buttons (1) and (2) to select the riding mode for
which you wish to restore the default parameters,
then press button (4). Use buttons (1) and (2) to select
the "DEFAULT" indicator, then keep button (4)
pressed for 3 seconds.
Now the "ALL DEFAULT" wording will be replaced by
the "PLEASE WAIT..." indicator, which will be
displayed for 3 seconds to inform the user that the
instrument panel is restoring the default parameters
for the selected Riding Mode.
After this time (3 seconds), the "EXIT" indicator will be
automatically highlighted; press button (4) to quit this
page and go back to the setting menu.
Note
When the default settings are active, a symbol
(circle with a dot) is always displayed close to the
DEFAULT indicator.
79

Ducati Hyperstrada Specifications

General

Transmission	6-speed
Frame	Tubular steel Trellis frame
Exhaust	2-1-2 system with catalytic converter and 2 lambda probes
Front Suspension	43 mm upside-down forks
Rear Suspension	Progressive linkage with adjustable Sachs monoshock
Front Brake	2 x 320 mm semi-floating discs, radially mounted Brembo monobloc 4-piston calipers
Rear Brake	245 mm disc, 2-piston caliper
Fuel Tank Capacity	16 liters (4.2 US gal)
Fuel Injection	Electronic fuel injection, 53 mm throttle bodies