Ducati Hyperstrada User Manual

Immobilizer code (PIN CODE)
This function provides vehicle temporary starting in
the event the Immobilizer system is malfunctioning.
Note
The PIN CODE function must be activated by
the user by entering your 4-digit PIN in the instrument
panel, otherwise the motorcycle cannot be started
temporarily in the case of a malfunction.
To view this function, access the Setting menu, and
press button (4) to enter the "PIN" page.
- If the PIN CODE has not been entered yet, the
"PIN Activation (INSERT NEW PIN)" function will
be displayed.
- If the PIN CODE has already been entered, the
"PIN Editing (MODIFY PIN CODE)" function will
be displayed.
To temporary start the vehicle in the event the
Immobilizer system is malfunctioning, refer to the
"Entering the PIN code to unlock the vehiclepage
105".
Warning
The motorcycle owner must activate (store) the
PIN code; if there is already a stored PIN, contact an
Authorised Ducati Dealer to have the function "reset".
To perform this procedure, the Authorised Ducati
Dealer may ask you to demonstrate that you are the
owner of the motorcycle.
95

Ducati Hyperstrada Specifications

General

Transmission	6-speed
Frame	Tubular steel Trellis frame
Exhaust	2-1-2 system with catalytic converter and 2 lambda probes
Front Suspension	43 mm upside-down forks
Rear Suspension	Progressive linkage with adjustable Sachs monoshock
Front Brake	2 x 320 mm semi-floating discs, radially mounted Brembo monobloc 4-piston calipers
Rear Brake	245 mm disc, 2-piston caliper
Fuel Tank Capacity	16 liters (4.2 US gal)
Fuel Injection	Electronic fuel injection, 53 mm throttle bodies