Setting (SPEED)
This function allows changing the units of
measurement of the following indicators: Vehicle
speed, Odometer, Trip 1, Trip2, Trip Fuel (when
active) and Average Speed.
Once the "SPEED" indicator is selected, press button
(4).
The instrument panel will display the Unit of
measurement being used. Press buttons (1) or (2) to
scroll the available units of measurement (Km/h and
mph). Once you have selected the units of
measurement you want to set, press button (4) again.
The instrument panel will automatically highlight the
"MEMORY" indicator; to store the new unit of
measurement, keep button (4) pressed for 3
seconds.
After this time, the instrument panel will display the
"MEMORIZED" indicator for 2 seconds as a
confirmation of the change made.
The "EXIT" indicator will be automatically highlighted;
press button (4) to quit this page and go back to the
setting menu.
KM/H: if this option is set, the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: Km
- Vehicle Speed and SPEED AVG: Km/h
MPH: if this option is set, the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: miles
- Vehicle Speed and SPEED AVG: mph
Note
When the default settings are active, a symbol
(circle with a dot) is always displayed close to the
DEFAULT indicator.
115
To Next Page
Loading...
