Setting (TEMPERATURE)
This function allows changing the units of
measurement of the following indicators: Engine
coolant temperature and Air Temperature.
Once the "TEMPERATURE" indicator is selected,
press button (4). The instrument panel will display the
Unit of measurement being used.
Press buttons (1) or (2) to scroll the available units of
measurement (°C and °F). Once you have selected
the units of measurement you want to set, press
button (4) again.
The instrument panel will automatically highlight the
"MEMORY" indicator; to store the new unit of
measurement, keep button (4) pressed for 3
seconds; after this time, the instrument panel will
display the "MEMORIZED" indicator for 2 seconds as
a confirmation of the change made.
The "EXIT" indicator will be automatically highlighted;
press button (4) to quit this page and go back to the
setting menu.
°C: if this option is set, the following values will have
the same units of measurement:
- Engine coolant temperature and T_AIR: °C
°F: if this option is set, the following values will have
the same units of measurement:
- Engine coolant temperature and T_AIR: °F
Note
When the default settings are active, a symbol
(circle with a dot) is always displayed close to the
DEFAULT indicator.
117
To Next Page
Loading...
