Setting (DEFAULT)
This function allows setting the "DEFAULT" units of
measurement based on vehicle version. Select the
"DEFAULT" indicator with buttons (1) and (2), then
keep button (4) pressed for 3 seconds. Now the "ALL
DEFAULT" wording will be replaced by the "PLEASE
WAIT..." indicator, which will be displayed for 3
seconds to inform the user that the instrument panel
is restoring the default units of measurement.
After 3 seconds, all the indicated units of
measurement will be updated and the "EXIT" indicator
will be automatically highlighted; press button (4) to
quit this function and go back to the setting menu.
Note
When the default settings are active, a symbol
(circle with a dot) is always displayed close to the
DEFAULT indicator.
To Next Page
Loading...
