6) LOW FUEL LIGHT (AMBER YELLOW).
Comes on when fuel is low and there are about 4
litres of fuel left in the tank.
7) TURN INDICATOR LIGHTS (GREEN).
Illuminates and flashes when the turn indicator is in
operation. They both come on and flash when the
Hazard function is in operation.
8) “ENGINE/VEHICLE DIAGNOSIS - EOBD” LIGHT
(AMBER YELLOW).
It turns on in the case of “engine” and/or “vehicle”
errors and in some cases will lock the engine.
9) LIMITER LIGHT “OVER REV”/ TRACTION
CONTROL LIGHT “DTC” (RED).
Over rev light
No limiter Off
1st threshold - no.
RPM before the limit-
er threshold (*)
On - STEADY
Rev limiter (limiter en-
gaged due to overrev-
ving) (*)
On - Flashing
(*) depending on the model, each calibration of the
Engine Control Unit may have a different "setting" for
the thresholds that precede the rev limiter and
regarding the rev limiter itself.
DTC intervention light
No intervention Off
Advance cutting On - Steady
Injection cutting On - Steady
Note
Should both lights for Over rev Function
activation and DTC intervention come on, instrument
panel will give priority to Over rev Function.
21
To Next Page
Loading...
Need help?
General
