To customise parameters, select the riding mode you
wish to edit and press button (4).
Customisable parameters are DTC (Ducati Traction
Control), ABS (Antilock Braking System) and ENGINE
(engine power).
Use buttons (1) and (2) to select the parameter you
wish to customise.
All edited (customised) parameters are stored inside
memory even after a Battery-Off.
The parameters of a single riding mode can also be
reset through the DEFAULT function.
Note
If on DEFAULT lettering right side a symbol is
displayed, this means that the default setup is active,
namely that the parameters shown are those set up
by Ducati.
Warning
Changes should only be made to the
parameters by people who are experts in motorcycle
set-up; if the parameters are changed accidentally,
use the "DEFAULT" function to restore factory
settings.
63
To Next Page
Loading...
