Ducati Hyperstrada User Manual

PIN activation
This function allows activating your own PIN CODE
to start the vehicle even if the Immobilizer system is
malfunctioning.
To display this function, access the Setting Menu and
select the "PIN" page.
Note
If "MODIFY PIN CODE" appears when
accessing this function, this means that there is
already a stored PIN and therefore the function is
already active.
When accessing this function, the "INSERT NEW PIN"
indicator and four dashes "- - - -" will be displayed. Now
enter a 4-digit code.
Entering the code:
- each time you press button (2), the highlighted
number increases from 0 to 9 and back to 0,
press button (4) to confirm;
- repeat this procedure until entering the fourth
digit.
- Press button (4) again to confirm.
Once PIN code is entered, the "MEMORY" indicator
will be automatically highlighted.
To store the entered PIN code, keep button (4)
pressed for 3 seconds.
The "MEMORIZED" indicator will be displayed to
confirm that the PIN Code has been stored in the
memory.
From now on, each time the “PIN CODE” function is
accessed, the display will read “MODIFY PIN
CODE”, meaning that the PIN CODE can be
modified.
97

Ducati Hyperstrada Specifications

General

Transmission	6-speed
Frame	Tubular steel Trellis frame
Exhaust	2-1-2 system with catalytic converter and 2 lambda probes
Front Suspension	43 mm upside-down forks
Rear Suspension	Progressive linkage with adjustable Sachs monoshock
Front Brake	2 x 320 mm semi-floating discs, radially mounted Brembo monobloc 4-piston calipers
Rear Brake	245 mm disc, 2-piston caliper
Fuel Tank Capacity	16 liters (4.2 US gal)
Fuel Injection	Electronic fuel injection, 53 mm throttle bodies