Use (1) and (2) (Fig 111) to select the Riding
mode you wish to customise and press ENTER.
The customisable parameters are the following:
●
Engine
●
DTC
●
ABS
●
DWC
●
DQS
●
Default (visible only if one or more parameters
of the selected Riding Mode have been
changed)
The motorbike is shown in the middle of the screen
with the relevant to the selected item
highlighted, press ENTER to modify the parameters.
Changes should only be made to the
parameters by people who are in motorcycle
set-up. If the parameters are changed accidentally,
use the "Default" function to restore factory
Fig 113
128
To Next Page
Loading...
