Paired devices
This function allows viewing and erasing paired
Bluetooth devices.
●
Use (1) and (2) from the Interactive
Menu to select the menu item and press
ENTER (3).
●
Select the Bluetooth item and press ENTER (3).
●
Select the Paired devices item and press ENTER
(3) (Fig 180).
The paired devices are listed. Press (1) and
(2) to select the desired device and press ENTER (3).
The message "Delete?" is displayed on the right.
Press ENTER (3) to delete the selected device from
the list: the message Wait... is displayed for a few
seconds and then the list of paired devices is
updated.
Note
If there are no paired devices, the message No
Device is displayed.
Fig 183
186
To Next Page
Loading...
