Ducati MULTISTRADA V45 - Page 170

The relevant window (C, Fig 135) is displayed:
- If the function is disabled,  is shown in white
with the stopwatch and indication of the
available laps in grey (D, Fig 136); press ENTER
to enable the function.
- If the function is enabled, On is shown with the
stopwatch and indication of the available laps in
white (D, Fig 136); press ENTER to disable the
function.
When the function is active, Lap is displayed next to
the gear indication.
Below the stopwatch is the current lap number. It is
possible to record maximum 30 laps. Once the
function is activated, flash  (6, Fig 134) must
be used to  the stopwatch: the first time
the flash  is pressed, the stopwatch flashes
for 1 second.
Then, every time the flash  (6) is pressed, the
stopwatch flashes for 1 second displaying the time
just completed and returns to display the time in
progress.
If the time just completed is the best among those
recorded up to that moment, the stopwatch displays
the time just recorded flashing for 1 second and
4
1
2
3
5
6
7
8
10
12
Air
24
°C
0
km/h
90
°C
10:34
pm
N
Gear
rpm X1000
km
km
km
2017
250
52.3
SPORT
00’00.00
Off
Lap 1/30
DTC
DQS
ABS
DWC
3
3
5
On
Total
Range
Trip 1
C
Fig 135
00’00.00
On
Lap 1/30
00’00.00
Off
Lap 1/30
D
E
Fig 136
169