PAGE
The PAGE key initiates general voice pages to all speakers, any combination of speaker
zones, or any combination of individual room speakers. Pressing this button automati
-
cally dials 72, which is the factory default setting to access paging functions. See Paging
beginning on page 48 for full instructions.
PROGRAM
The PROGRAM key initiates, modifies, or cancels audio program source distribution to
the speakers. The audio source is user selectable and can be distributed to all speakers,
any combination of speaker zones, or any combination of individual room speakers.
Changes can be made while audio program distribution is in progress, depending on the
hardware configuration and the change desired. Pressing this button automatically dials
73, which is the factory default setting to access audio program source distribution. See
Distributing Audio Programs beginning on page 60 for full instructions.
Programmable F1 through F8 Keys
The F1–F8 function keys provide easy one-button access to common ATEL functions.
They are programmed at the factory to default settings. The overlay sheet on the ATEL
provides text for the default settings, but it can be modified by turning over the sheet.
While settings can be changed at any time, this manual assumes that these default settings
have not been changed. If they have, the keys will operate differently than described.
They can alternatively be programmed as general purpose speed dials. It is recommended
that any reprogramming of these keys be written down in the chart provided in Appendix B
on page 79 for future reference. To customize these keys see Programming the F1
through F8 Function Keys on page 16.
PREVIOUS Displays the previous call in the queue (F1 default).
NEXT Displays the next call in the queue (F2 default).
MUSIC Toggles the background music on/off (F3 default).
SCROLL Displays messages longer than 16 characters (F4 default).
REDIAL Redials the last number sequence (F5 default).
MUTE Mutes the panel microphone in speaker/microphone
push-to-talk (PTT) operation, or the handset transmitter and
receiver in handset operation (F6 default).
FLASH
ANSWER
Indicates a hookswitch flash (F7 default).
Answers the next intercom call in the queue (F8 default).
CALL PARK Allows a line to be parked.
DO NOT DISTURB Forward all calls to voice mail (only available with voice mail
system).
CALL HOLD Places a call (telephone or trunk) on hold.
CALL TRANSFER Places a call (telephone or trunk) on hold
SCR+ Telephone Operation Manual
13
ATEL Description and Features
To Next Page
Loading...