Dukane SCR+ - Canceling Audio Program Distribution; Monitoring Audio Program Sources

Canceling Audio Program Distribution
To cancel an audio program currently being distributed, follow the steps below.
1. ATEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Lift the handset.
2. ATEL: Press PROGRAM then press 7, or dial 737.
STEL, DTMF telephone, or CTEL: Dial 737.
3. ATEL: Enter the audio program source (01 or 02) currently in use, and press #.
STEL, DTMF telephone, or CTEL: Same as ATEL.
Notes:
•
If only one audio program source is available, 01 will be the only source you
can select.
•
A double tone burst after pressing # indicates restricted access to this feature from
this phone. You must enter a four-digit password after the tone to complete this
operation. See Password Control on page 3.
4. ATEL: Hang up the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Hang up the handset.
Monitoring Audio Program Sources
To monitor an audio program from a System phone, follow the steps below.
1. ATEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Lift the handset.
2. ATEL: Press PROGRAM then press 8, or dial 738.
STEL, DTMF telephone, or CTEL: Dial 738.
3. ATEL: Select the audio program source (01 or 02) currently in use, and press #. You
will hear the audio source through the handset or speaker.
STEL, DTMF telephone, or CTEL: Same as ATEL.
Notes:
•
If only one audio program source is available, 01 will be the only source you
can select.
•
This function uses a telephone link. Do not use it to provide background music.
See Setting the ATEL Background Music on page 18.
4. ATEL: Hang up the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Hang up the handset.
SCR+ Telephone Operation Manual 65
Distributing Audio Programs