Dukane SCR+ - Distributing an Audio Program to Selected Rooms

4. ATEL: The audio program continues until you cancel it (see Canceling Audio
Program Distribution, page 65).
STEL, DTMF telephone, or CTEL: Same as ATEL.
5. ATEL: Hang up the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Hang up the handset.
Distributing an Audio Program to Selected Rooms
To distribute an audio program to selected rooms, follow the steps below. Regardless of
whether or not your System is networked to other Systems, you can only distribute audio
programs in your own System.
1. ATEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Lift the handset.
2. ATEL: Press PROGRAM then press 3, or dial 733.
STEL, DTMF telephone, or CTEL: Dial 733.
3. ATEL: Select the audio program source (01 or 02), then enter the room numbers, and
press #.
STEL, DTMF telephone, or CTEL: Same as ATEL.
Notes:
•
If only one audio program source is available, 01 will be the only source you
can select.
•
A double tone burst after pressing # indicates restricted access to this feature from
this phone. You must enter a four-digit password after the tone to complete this
operation. See Password Control on page 3.
4. ATEL: The audio program will continue until you cancel it (see Canceling Audio
Program Distribution, page 65).
STEL, DTMF telephone, or CTEL: Same as ATEL.
5. Hang up the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Hang up the handset.
62 SCR+ Telephone Operation Manual
Distributing Audio Programs