Dukane SCR+ - ATEL Programming and Settings

To Next Page

To Previous Page

Menu Key

The MENU key places the ATEL into the Local Diagnostic/Programming Mode. In this

mode, the ATEL’s F1–F8 keys, the four dedicated function keys, the ringer type, and the

ringer volume can be custom programmed. See Local Diagnostic/Programming Mode on

the next page.

Error Codes

Error codes appear on the ATEL display if communication problems occur within the

System. These codes display as “SYSTEM ERROR” followed by a two-digit error code.

When an error code appears, write down the exact display and contact your system ad

ministrator or authorized Dukane distributor for assistance.

Selectively Answering Call-Ins (ATEL Only)

There are two ways to selectively answer calls:

•

To view the call-ins in the queue, press # or the function key programmed as NEXT to

scroll forward through the call-in waiting queue. Press * or the function key pro-

grammed as PREVIOUS to scroll backward.

When the desired calling room number appears, lift the handset if auto answer is

enabled, or dial 742#, or press the function key programmed to dial that sequence.

(F8 factory default)

—OR—

•

Without displaying the calling room number, lift the handset or press SPKR PHONE,

press #, and dial the calling room number.

Local Diagnostic/Programming Mode

Entering the Local Diagnostic/Programming Mode

To enter the Local Diagnostic/Programming Mode, press the MENU key for 1-1/2

seconds. Once the ATEL is in this mode, it alternately displays its model number and its

hardware revision/software version. Thereafter, every time a key is pressed, the ATEL

will sound a confirmation tone and display the key’s function.

SCR+ Telephone Operation Manual

Error Codes