Transferring from System Phone to Associated Speaker
To transfer a call from a System phone to the associated room speaker follow the steps
below.
1. ATEL: Press and release the hookswitch or press and release the function key
programmed as FLASH.
STEL, DTMF telephone, or CTEL: Press and release the hookswitch or press and
release FLASH.
2. ATEL: Dial 741#. Call audio transfers to the speaker.
STEL, DTMF telephone, or CTEL: Same as ATEL.
3. ATEL: Hang up the handset.
STEL, DTMF telephone, or CTEL: Same as ATEL.
Calling a Telephone
All speakers, ATELs, STELs, CTELs, and standard DTMF telephones have a three-,
four-, or five-alphanumeric dial number that can be either a room number or an extension
number. (The terms “room number” and “extension number” are used interchangeably
throughout this manual.) The star key (*) is used to dial alpha characters. See the examples
below.
103*2 = 103A
103**2 = 103B
103***2 = 103C
103*3 = 103D
When dialing, press each character within 15 seconds. If no dialing activity occurs within
this time, a tone sounds to alert you to hang up and redial.
Note:
A System phone (STEL, DTMF telephone, or CTEL) can be programmed to
automatically call a particular extension when the handset is lifted. System phones
programmed in this way cannot be used to call any other extension.
SCR+ Telephone Operation Manual
31
Calling a Telephone
To Next Page
Loading...