Dukane SCR+ - Placing an Outside Call Connected Via a PBX on Hold; Transferring an Outside Call Connected Via a PBX to Another Outside Extension

Placing an Outside Call Connected via a PBX on Hold
1. ATEL: Press and release the function key programmed as FLASH (default is F7) or
press and release the hookswitch.
STEL, DTMF telephone, or CTEL: Press and release FLASH (if present) or press
and release the hookswitch.
2. ATEL: Dial 759# to put the outside call on hold.
Note:
To remove the call from hold, dial the pickup code of the PBX, following the outside
line equipment manufacturer’s instructions.
Transferring an Outside Call Connected via a PBX to Another Outside
Extension
1. ATEL: Press and release the function key programmed as FLASH (default is F7) or
press and release the hookswitch.
STEL, DTMF telephone, or CTEL: Press and release FLASH (if present) or press
and release the hookswitch .
2. Dial 759# to put the outside call on hold.
3. Dial the other phone extension and hang up.
SCR+ Telephone Operation Manual 37
Calling a Telephone