Dungs MPA 5111 User Manual

47 … 68
46 … 68
Printed in Germany • Edition 02.14 • Nr. 254 722
Info display
▶ The info display is activated out of the operational status display.
▶
Using the info display, information on the current counter reading such as
start counter and permanent runtime meter can be called.
▶ This operating mode is left after a timeout of 20 s if no key is pressed within this time period.
11.7 Information display
Activation of the info display
by simultaneous pressing of
the keys
Display of the
quality
of the ionisation
current
Display of the fth
place before the
decimal point (1)
on the permanent
start counter
Display of the fth
place before the
decimal point (100)
on the permanent
start counter
Display of the fth
place before the dec-
imal point (10000) on
the permanent start
counter
Display of the fth
place before the
decimal point (1) on
the permanent run
time meter
Display of the fth
place before the
decimal point (100)
on the permanent run
time meter
Display of the fth
place before the
decimal point (10000)
on the permanent run
time meter
Back to the opera-
tional status display
Switches to the
operational status
display
from each info display state

Dungs MPA 5111 Specifications

General

Brand	Dungs
Model	MPA 5111
Category	Control Unit
Language	English