51 … 68
50 … 68
Printed in Germany • Edition 02.14 • Nr. 254 722
Reset display
▶ The reset display is activated out of the operational status display.
▶
The error memory, the access levels, resettable runtime meter and start counter can be reset by
means of the reset display.
▶ This operating mode is left after a timeout of 20 s if no key is pressed within this time period.
Action to be carried out:
0 deletes the error memory
1 resets the access level
2 deletes the resettable runtime
meter
3 deletes the resettable start
counter
4 Change password for SERVICE
level
5 Change password for OEM
level
Activation of the reset display by simultaneous pressing of the keys
Cancel the action
Back to the operational
status display
next
Parameter
previous
Parameter
11.10 Reset display
1
Action 4,5
Action 0,1,2,3
To Next Page
Loading...
