Dungs MPA 5111 User Manual

49 … 68
48 … 68
Printed in Germany • Edition 02.14 • Nr. 254 722
Parameterisation display
▶
The parameterisation display can only be activated when the standby mode on the operational
state indicator is active.
▶ The parameters which cannot be changed due to the access level are only displayed.
Activation of the parameterisation display by
simultaneous pressing of the keys
Reduces the value
Switches to the
operational
status display
3,4
5
1
Increases the value
Parameter type U8
Parameter type
U1
5
2
Value equal to 0
Value equal to 1
Saves the value
Reduces the value
Increases the value
Previous parameter
Next parameter
Conrm the param-
eter selection
Action
cancel
Cancel the action
Saves the value
11.9 Parameterisation display

Dungs MPA 5111 Specifications

General

Brand	Dungs
Model	MPA 5111
Category	Control Unit
Language	English