19
11. USING THE CONTROL PANEL
● Paper size
• Set when using the downstream unit.
If no downstream unit is connected, the paper size will not be displayed.
• Displays the paper size saved.
Select from A3, A4, A5, B4, B5, LGR, LGL, LTR, INV, A3SR, custom 1, custom 2, custom
3. (For details on setting the paper size, refer to "12. CONNECTING THE DOWNSTREAM
UNIT" (page 27).)
• The settings will be preserved even after the power is turned OFF.
● Collation mode menu
• Displays the collation mode saved.
Select the collation mode from NORMAL, INTERLEAVING, BLOCK, and ALTERNATIVE.
• The settings will be preserved even after the power is turned OFF.
Note If connecting the downstream unit, only the INTERLEAVING mode settings will
not be preserved.
● No. of interleaves
Displays the number of interleaves entered.(
Refer to page 21.)
Displays only when the interleaving mode is set.
● Operating state
For checking the current operating state of the unit.
Running .................... Currently feeding paper
Standby .................... Currently standing by
When set to the block mode, displays from which block paper is being fed.
● No. of processing sets
Displays the number of sets entered by the count down display method.
This section describes the contents of the LCD and how to set the collation mode, paper
receiving mode, and count display method.
11-1. LCD window
Paper size
Collation mode menu
No. of interleaves
No. of processing sets
Operating state
1/2,2/2
Block mode
To Next Page
Loading...
Need help?
General
