Duplo DFC-12 User Manual

21
11. USING THE CONTROL PANEL
11-3. Setting the number of interleaves
When the interleaving mode is selected, interleaves will be inserted after every speci-
fied number of sets have been collated. Enter the number of interleaves at the "Sheet
Quantity" screen.
Up to 200 sets can be specified to insert interleaves.
Press the key to display the
"Sheet Quantity" screen.
1
Press the key and switch to the
"Input Sheet Qty" screen.
2
Enter the number of interleaves us-
ing the numerical keys. If the previ-
ous setting of the number of inter-
leaves is remaining, press the
key to clear to 0 first before en-
tering the new number.
3
321
654
987
0
Press the key and save the num-
ber of interleaves entered at step 3.
4
To redo the setting, press the key an-
other time to return to step 3.
5
Press the key to return to the
standby screen.
Press the key until the standby screen
is displayed.
Check that the number of interleaves is
displayed at the top right of the screen.
number of interleaves
* Qty ···········Quantity

Duplo DFC-12 Specifications

General

Brand	Duplo
Model	DFC-12
Category	Printer Accessories
Language	English