Duplo DFC-12 User Manual

52
20. SPECIFICATIONS
Note 1: For the OFFSET mode, B5 size (182 mm x 257 mm) to A3 size (297 mm x 420 mm) paper can be used.
Paper measuring less than 182 mm or more than 298 mm wide can only be used with the STRAIGHT
mode.
Note 2: Depending on a downstream unit specifications of the downstream unit used. (Max. 40 sets/min)
Note 3: When stabilizer is used.
Note 4, 5: Paper details
Specifications and appearance are subject to change without prior notice for improvements.
DFC-12 DFC-10
Friction feed vertical collator
12 10
3-ring friction feed
28 mm equivalent to Fine quality paper: 64g/m
2
, 330 sheets
70 mm equivalent to Fine quality paper: 64g/m
2
, 800 sheets
Smallest: A5 (148 mm x 210 mm) Feeding direction
(Note 4)
: 140 mm to 450 mm
Largest A3SR (320 mm x 450 mm) width
(Note 5)
: 140 mm to 320 mm
Medium quality paper, Fine porous paper, fine quality paper (52.3 to 128 g/m
2
)
Sheet
Max. 65 sets/minute (A4, Overlap: None)
Speed can be selected from auto to 5 levels
(Note 2)
Preset function memorizes bins to be used.
Empty-feed, double-feed, paper jam
No-paper, conveyance cover open, paper receiving table full, downstream unit
error.
Paper ejection
, interleave insertion, block mode feeding, paper Overlap (3 levels),
memory backup, OFFSET/STRAIGHT stacking
AC100-240 V, 50/60 Hz
2.8-1.2A 2.0-0.8A
820 (width) x 560 (depth) x 1137 (height) 820 (width) x 560 (depth) x 993 (height)
75 kg
(Note 3)
66.6 kg
(Note 3)
Means "width of paper"
Means "feedeing direction"
Name
Model
No. of bins
Paper feeding
method
Paper feed bin
capacity
Paper receiving
table capacity
Paper size
(Note 1)
Paper quality
Paper type
Speed
Paper feed bin
detection
Paper feed
error detection
Other detec-
tions
Additional
functions
Power supply
Power con-
sumption
Size (mm)
Mass (Weight)

Duplo DFC-12 Specifications

General

Brand	Duplo
Model	DFC-12
Category	Printer Accessories
Language	English