40
No paper has been fed.
• Check the bin where the error lamp
is blinking in green.
• Refer to "14. WHEN BIN ERROR
LAMPS LIGHT/BLINK" (
page 36).
Press the Start key to restart operations.
15-5. When "Mis-Feed" is displayed
15-6. When "Double Detect" is displayed
Paper has been double-fed.
• Check the bin where the error lamp
is blinking in red.
• Refer to "14. WHEN BIN ERROR
LAMPS LIGHT/BLINK" (
page
36).
Press the Start key to restart operations.
Error lamp
Error
Error lamp
Error
15. WHEN ERROR MESSAGES ARE DISPLAYED